Technical
Standards for Quality (NTBs)
BIS Standards
Notified by DGFT under Notification 44-RE/24.11.2000 (As amended by 79(RE)/14.01.2009)
Import of all the products as per Appendix V to
Schedule I of the ITC(HS) Classifications of Export and Import Items,
1997-2002, shall be subject to compliance of the mandatory Indian Quality
Standards as mentioned in column 2 of the said Annexure, which are also
applicable to domestic goods. For compliance of this requirement, all
manufactures/ exporters of these products to India,
shall be required to register themselves with Bureau of India Standards (BIS).”
Annexure ‘A’ to Notification
No. 44 Dated 24th November, 2000
The Appendix III
to Schedule 1 (IMPORTS) of ITC(HS) Classifications of Export and Import Items
has been amendedby DGFT Notification
53(RE)/21.11.2007] read as follows:
Appendix
III
SNo. |
Applicable BIS
Standards |
Name of the products |
1. |
IS 1165 |
Milk powder |
2. |
IS 1166 |
Condensed milk, partly skimmed and skimmed
condensed milk |
3. |
IS 1656 |
Milk-cereal based weaning foods |
4. |
IS 11536 |
Processed cereal based complementary foods for
infants |
5. |
12176 |
Sweetened ultra high temperature treated
condensed milk |
6. |
13334(Part 1) |
Skimmed milk powder, standard grade |
7. |
13334(Part 2) |
Skimmed milk powder, extra grade |
8. |
14542 |
Partly skimmed milk powder |
9. |
14433 (Part 1) |
Infant milk substitute, milk protein based |
10. |
IS 13428 |
Packaged Natural Mineral Water |
11. |
IS 14543 |
Packaged Drinking Water (Other than Packaged
Natural Mineral Water) |
12. |
IS 269 |
33 Grade Ordinary Portland cement |
13 |
IS 455 |
Portland Slag cement |
14. |
IS 1489(Pt1 & Pt2) |
Portland pozzolana
cement - Part 1 Fly Ash based and Part 2 Calcined
Clay based |
15. |
IS 3466 |
Masonry cement |
16. |
IS 6452 |
High alumina cement for structural use |
17. |
IS 6909 |
Super sulphated cement |
18. |
IS 8041 |
Rapid hardening Portland cement |
19. |
IS 8042 |
White Portland Cement |
20. |
IS 8043 |
Hydrophobic Portland Cement |
21. |
IS 8112 |
43 Grade Ordinary Portland cement |
22. |
IS 8229 |
Oil well cement |
23. |
IS 12269 |
53 Grade Ordinary Portland cement |
24. |
IS 12330 |
Sulphate resisting Portland cement |
25. |
IS 12600 |
Low heat Portland Cement |
26. |
IS 302(Pt2/Sec 3) |
Safety of household and similar electrical
appliances -Electric Iron |
27. |
IS 302(Pt2/Sec 30) |
Safety of household and similar electrical
appliances- Electric radiators |
28. |
IS 302(Pt2/Sec 201) |
Safety of household and similar electrical
appliances - Electric immersion water heater |
29. |
IS 302 (Pt2/Sec 202) |
Safety of household and similar electrical
appliances - Electric stove |
30. |
IS 418 |
Tungsten filament general service electric lamps
(upto 100 W) |
31. |
IS 694 |
PVC insulated cables for working Voltages upto and including 1100 V |
32. |
IS 3854 |
Switches for domestic and similar purposes |
33. |
IS 8828 |
Electrical Accessories - Circuit Breakers for
over current protection for household and similar installations |
34. |
IS 9968 (Pt.1) |
Elastomer insulated cables (Pt.1): For working voltages upto
and including 1100 V |
35. |
IS 12640 (Pt.1) |
Residual current operated circuit breakers for
household and similar uses - (Pt.1) : Circuit
breakers without integral overcurrent
protection (RCCBs) |
36. |
IS 12640 (Pt.2) |
Residual current operated circuit breakers for
household and similar uses - (Pt.2) : Circuit breakers with integral overcurrent protection (RCVOs) |
37. |
IS 13010 |
AC Watt-hour meters, class 0.5, 1 & 2 |
38. |
IS 13779 |
AC static watt-hour meters, class 1 & 2 |
39. |
IS 14697 |
AC static transformer operated watt-hour and VAR-
hour meters, class 0.2S & 0.5S |
40. |
IS 15111 (Pt1 & Pt 2) |
Self ballasted lamps for general lighting services Part 1 Safety requirements and
Part 2 Performance requirements |
41. |
IS 8144 |
Multipurpose dry batteries |
42. |
3055(Part 1) |
Clinical Thermometers : Part 1 Solid Stem Type |
43. |
3055(Part 2) |
Clinical Thermometers : Part 2 Enclosed Scale
Type |
44. |
IS 1161 |
Steel tubes for structural purposes |
45. |
IS 1239(Pt1) |
Mild steel tubes, tubular products and other
wrought steel fittings: Part 1 Mild Steel Tubes |
46. |
IS 4270 |
Steel tubes used for water wells (upto 200 mm dia) |
47. |
IS 1342 |
Oil pressure stoves |
48. |
IS 2787 |
Multi-burner oil pressure stoves |
49. |
IS 10109 |
Oil pressure stove, offset burner type |
50. |
IS 3470 |
Hexane, Food grade |
51. |
IS 3196(Pt1) |
Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases:
Pt1 Cylinders for liquefied petroleum gas (LPG) |
52. |
IS 3196(Pt2) |
Welded low carbon steel gas cylinder exceeding
5-litre water capacity for low- pressure liquefiable gases: Pt 2 Cylinders
for liquefiable gases other than LPG. |
53. |
IS 3196 (Part 4) |
Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases-
Specification Part 4 Cylinders for toxic and corrosive gases |
54. |
IS 3224 |
Valve fittings for compressed gas cylinder
excluding liquefied petroleum gas cylinders |
55. |
IS 3745 |
Yoke type valve connections for small medical
gas cylinders |
56. |
IS 7142 |
Welded low carbon steel gas cylinder for low
pressure liquefiable gases not exceeding 5 litre
water capacity |
57. |
IS 7285 (Part 1) |
Refillable Seamless steel gas cylinders –
Specification – Part 1: Normalized Steel
Cylinders |
58. |
IS 7285 (Part 2) |
Refillable Seamless steel gas cylinders –
Specification – Part 2: Quenched and Tempered Steel Cylinders with Tensile
strength less than 1 100 MPa (112 kgf/mm2) |
59. |
IS 7302 |
Valve fittings for gas cylinder valves for use
with breathing apparatus |
60. |
IS 7312 |
Welded and seamless steel dissolved acetylene gas
cylinders |
61. |
IS 8737 |
Valve fittings for use with liquefied petroleum
gas cylinders of more than 5 litre water capacity:
Pt 2 Valve fittings for newly manufactured LPG cylinders |
62. |
IS 8776 |
Valve fittings for use with liquefied petroleum
gas cylinder up to and including 5 litre water
capacity |
63. |
IS 9798 |
Low pressure regulators for use with liquefied
petroleum gas (LPG) mixtures |
64. |
IS 14899 |
Liquefied petroleum gas containers for automotive
use |
65. |
IS 15100 |
Multifunction valve assembly for permanently
fixed liquefied petroleum gas (LPG) containers for automotive use |
66. |
IS 7620(Pt1) |
Diagnostic Medical X-Ray Equipment |
67. |
IS 14625 |
Plastic Feeding Bottles |
68. |
10001 |
Constant speed compression ignition (diesel)
engines for general purposes (up to 20 KW) |
69. |
1785(Part 1) |
Specification for plain hard-drawn steel wire for
pre-stressed concrete; Part 1 Cold-drawn stress relieved wire. |
70. |
1785(Part 2) |
Specification for plain hard-drawn steel wire for
pre-stressed concrete; Part 2 as drawn wire. |
71. |
6003 |
Specification for indented wire for pre-stressed
concrete. |
72. |
6006 |
Specification for uncoated stress relieved strand
for pre-stressed concrete. |
73. |
13620 |
Specification for fusion bonded epoxy coated
reinforcing bars. |
74. |
14268 |
Specification
for uncoated stress relieved low relaxation seven ply strand for pre-stressed
concrete. |
SNo. 69 to 74 inserted by
79(RE)/14.01.2009 |
3. This issues
in public interest.